WeldCanvas
Horseshoe wine rack (6 bottles) — 3D model in WeldCanvas

Horseshoe wine rack (6 bottles)

Front shoes hold the necks, back shoes hold the bottles; toes down so each shoe is a cradle. Horseshoes are bought parts (size 0 used shoes are typical). Shoes vary — lay them out and adjust before you weld.

Size
About 14" wide × 9" tall × 8-1/4" deep, 12 shoes
Skill level
BeginnerSquare cuts only
Pieces to cut
6
Steel
About 6 ft, 2 sticks to buy
Plan price
$0.99, yours to keep
Open this plan in WeldCanvas

Steel you'll need

  • 1-1/2×1/4 flat bar2 pieces
  • 1×1/8 flat bar4 pieces

Also buy

  • Felt pads for the feet
  • Clear coat

What the plan includes

  • A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
  • A shopping list and a cutting plan that gets every piece from the fewest sticks
  • Build steps: what to tack first, how to check square, and a weld order that keeps it straight
  • A 3D model you can resize — change a size and the cut list follows

More plans in Horseshoe projects

See all
Horseshoe Christmas tree — 3D model Horseshoe Christmas tree Beginner$0.99 Horseshoe boot rack (4 pairs) — 3D model Horseshoe boot rack (4 pairs) Intermediate$0.99 Horseshoe coat and hat rack — 3D model Horseshoe coat and hat rack Beginner$0.99 Horseshoe key / leash rack — 3D model Horseshoe key / leash rack Beginner$0.99