WeldCanvas
Horseshoe boot rack (4 pairs) — 3D model in WeldCanvas

Horseshoe boot rack (4 pairs)

Floor rack: boots hang upside down on the posts to dry. A horseshoe at each end is the carry handle.

Size
40" × 12", posts 18" tall
Skill level
Intermediate8 miter cuts at 45°
Pieces to cut
13
Steel
About 24 ft, 2 sticks to buy
Plan price
$0.99, yours to keep
Open this plan in WeldCanvas

Steel you'll need

  • 1" OD × 0.065 round tube8 pieces
  • 1×1×0.083 (14 ga) square tube5 pieces

Also buy

  • Rubber feet

What the plan includes

  • A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
  • A shopping list and a cutting plan that gets every piece from the fewest sticks
  • Build steps: what to tack first, how to check square, and a weld order that keeps it straight
  • A 3D model you can resize — change a size and the cut list follows

More plans in Horseshoe projects

See all
Horseshoe Christmas tree — 3D model Horseshoe Christmas tree Beginner$0.99 Horseshoe wine rack (6 bottles) — 3D model Horseshoe wine rack (6 bottles) Beginner$0.99 Horseshoe coat and hat rack — 3D model Horseshoe coat and hat rack Beginner$0.99 Horseshoe key / leash rack — 3D model Horseshoe key / leash rack Beginner$0.99