WeldCanvas
Stall front 12 ft (board and bar) — 3D model in WeldCanvas

Stall front 12 ft (board and bar)

12' stall front: 2×2 tube frame, 2×6 boards in the bottom 4', 1" round bars on 3" centers above, and a 44" opening for a sliding door (see "Sliding stall door"). Bolts to your barn posts.

Size
140" wide × 90" tall, 44" door opening
Skill level
Intermediate12 miter cuts at 45°
Pieces to cut
38 plus 1 sheet
Steel
About 144 ft, 15 sticks to buy
Plan price
$10.99, yours to keep
Open this plan in WeldCanvas

Steel you'll need

  • 1" OD × 0.065 round tube29 pieces
  • 2×2×0.120 (11 ga) square tube9 pieces
  • 2×6 treated boards1 sheet

Also buy

  • Sliding door track and 2 rollers
  • Door stop and latch
  • Bolts to the barn posts

What the plan includes

  • A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
  • A shopping list and a cutting plan that gets every piece from the fewest sticks
  • Build steps: what to tack first, how to check square, and a weld order that keeps it straight
  • A 3D model you can resize — change a size and the cut list follows

More plans in Horse & barn

See all
Saddle rack, wall, single — 3D model Saddle rack, wall, single BeginnerFree Saddle rack, wall, 3-tier — 3D model Saddle rack, wall, 3-tier Intermediate$2.99 Saddle stand, portable — 3D model Saddle stand, portable Intermediate$2.99 Bridle and tack hook rail — 3D model Bridle and tack hook rail Advanced$4.99