WeldCanvas
Ranch pipe gate 16 ft — 3D model in WeldCanvas

Ranch pipe gate 16 ft

Five-rail pipe gate: 2" schedule 40 pipe uprights with 1-1/2" round tube rails coped (fishmouthed) into them — full-size cope templates print with the cut sheet. Long gates sag; add a cable or chain brace from the top of the hinge upright to the bottom of the latch end.

Size
192" wide × 50" tall
Skill level
BeginnerSquare cuts only
Pieces to cut
7
Steel
About 87 ft, 6 sticks to buy
Plan price
$4.99, yours to keep
Open this plan in WeldCanvas

Steel you'll need

  • 1-1/2" OD × 0.120 round tube5 pieces
  • 2" pipe, sch 40 (2.375" OD)2 pieces

Also buy

  • 2 gate hinges (sized for the upright)
  • Gate latch or chain
  • Turnbuckle and cable for a sag brace (recommended)

What the plan includes

  • A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
  • A shopping list and a cutting plan that gets every piece from the fewest sticks
  • Build steps: what to tack first, how to check square, and a weld order that keeps it straight
  • A 3D model you can resize — change a size and the cut list follows

More plans in Farm & ranch

See all
Ranch pipe gate 12 ft — 3D model Ranch pipe gate 12 ft Beginner$2.99 Ranch pipe gate 14 ft — 3D model Ranch pipe gate 14 ft Beginner$4.99 Corral panel 10 ft — 3D model Corral panel 10 ft Beginner$2.99 Corral panel 12 ft — 3D model Corral panel 12 ft Beginner$2.99