Mounting block, 2 steps
2-step mounting block with diamond plate treads.
- Size
- 24" wide × 24" deep × 16" tall
- Skill level
- BeginnerSquare cuts only
- Pieces to cut
- 16 plus 2 sheets
- Steel
- About 18 ft, 1 stick to buy
- Plan price
- Free
Steel you'll need
- 1-1/2×1-1/2×0.120 (11 ga) square tube16 pieces
- 1/8" steel diamond plate2 sheets
Also buy
- Non-slip tread tape
- Rubber feet
What the plan includes
- A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
- A shopping list and a cutting plan that gets every piece from the fewest sticks
- Build steps: what to tack first, how to check square, and a weld order that keeps it straight
- A 3D model you can resize — change a size and the cut list follows
Safety note. Load-bearing: not engineered or rated. Build heavier and have it checked if people or heavy loads will stand on it.
