WeldCanvas
Hammer and chipping hammer holder — 3D model in WeldCanvas

Hammer and chipping hammer holder

Flat bar strap with three square loops; handles drop through. Bolt or weld it to a table leg.

Size
14" strap, 3 loops
Skill level
Intermediate12 miter cuts at 45°
Pieces to cut
10
Steel
About 5 ft, 2 sticks to buy
Plan price
$2.99, yours to keep
Open this plan in WeldCanvas

Steel you'll need

  • 1×1×0.083 (14 ga) square tube9 pieces
  • 2×1/4 flat bar1 piece

Also buy

  • Bolts or weld to a table leg

What the plan includes

  • A cut sheet: every piece drawn to scale with tip-to-tip length and the saw setting for each end
  • A shopping list and a cutting plan that gets every piece from the fewest sticks
  • Build steps: what to tack first, how to check square, and a weld order that keeps it straight
  • A 3D model you can resize — change a size and the cut list follows

More plans in Shop

See all
Chop saw stand — 3D model Chop saw stand BeginnerFree Outfeed / assembly table 48×48 — 3D model Outfeed / assembly table 48×48 Intermediate$2.99 Heavy fixture table base 48×48 — 3D model Heavy fixture table base 48×48 Intermediate$2.99 Step stool — 3D model Step stool BeginnerFree